Allegro 3000-01 Airline Filter - CLOSEOUT

The Airline Filter is designed to remove oil mist, water vapor and particulates down to 0.5 microns from breathing grade compressed air. The Airline filter is placed inline between the breathing air source and the respirator airline hose, air enters the filter through the inlet port. Once the air has been filtered, moisture is removed and drained through a drain valve located at the bottom of the airline filter.

Product Specifications:

Construction:

• Body: Heavy gauge aluminum, powder-coated (gray)
• Impact and corrosion resistant
• Valve: Balanced valve design, Brass/Nitrile
• Relief Valve: Brass, spring loaded (external)
• Inlet: 1 in NPT
• Fitting: ¼ in (.63 cm) Rectus Quick-Connect
• Max Temperature: 140°F (60°C)
• Max Pressure: 125 psi
• Pressure Gauge: Analog, 0-150 psi
• Legs: ABS Plastic, (used to mount the airline filter on a wall or as a stand)

Filter Cartridge:

• Large capacity filter cartridge provides better and longer filtration. 
• This filter helps trap water, oil, dust particles and odors from the compressed air source.
• Material: Felt, polyester wadding, quality activated carbon and quality activated alumina material.

Sold per Each.

 WARNING: This product can expose you to chemicals including Carbon Black,
which is known to the State of California to cause Cancer. For more information go to www.P65Warnings.ca.gov. 

Important Notice: All Respirators, Cartridges, and Filters to be returned must be unopened and in it's original packaging.  All opened packages are not returnable.