MCR Safety Classic Series Rain Gear .35Mm Pvc / Polyester Material 3 Piece Waterproof Yellow Rain Suit Rain Jacket, Detachable Hood And Bib Pants, XL, 2003XL - 1 Each

SKU:
R3-2003XL
UPC:
806808075796
Availability:
Ship 1-3 business days
Weight:
1.00 LBS
Width:
8.00 (in)
Height:
8.00 (in)
Depth:
8.00 (in)
Shipping:
Calculated at Checkout
MSRP: $17.80
$10.47
— You save $7.33
Frequently bought together:

Description

The Classic Series rain gear is made of the most popular material in the Industry. It combines the strength and waterproof qualities of PVC with the durability of a polyester backing. The 2003 yellow three piece rain suit features a jacket with detachable hood and bib style pants. The rain jacket offers a snap front, take up snaps at the wrists, detachable hood with drawstring, and two front patch pockets. The bib style rain pants feature a fly front with snap and take up snaps at the waist and ankles. If you are looking for the best rain wear options, look no further than MCR Safety!

Additional Information:

Performance Standards

ANSI Cut
A4
ANSI Abrasion
3
ANSI Puncture
3
ANSI Contact Heat
2

ANSI Cut

- ANSI Cut Level A4

- ANSI/ISEA 105:2016 Standard

- ASTM F2992-15 Cut Resistance Test Method

WARNING:
THIS PRODUCT IS CUT RESISTANT, NOT CUT PROOF.  DO NOT USE WITH OR AROUND MOVING EQUIPMENT, TOOLS OR MATERIAL.

CE Tear

This tear score was derived from the EN 388:2016 standard.  The European Standard EN 388:2016 covers the test requirements for safety gloves that are provided to protect against mechanical risks.

WARNING:
THIS PRODUCT IS TEAR RESISTANT, NOT TEAR PROOF.  DO NOT USE WITH OR AROUND MOVING EQUIPMENT, TOOLS OR MATERIAL.

ANSI Abrasion

- ANSI Abrasion Level 3

- ANSI/ISEA 105:2016 Standard

- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves

- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves

ANSI Puncture

- ANSI Puncture Level 3

- ANSI/ISEA 105:2016 Standard

- Puncture Resistance Test Method EN388

ANSI Contact Heat

Level 2

For applications less than 284 degrees Fahrenheit.  Contact Heat Only, Not Direct Flame.

-Gloves Tested Palm Only-

ANSI/ISEA 105:2016 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance.  Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.

Gauge

Knitted Gloves and sleeves are made with yarn that range from 7 gauge to 21 gauge.  The lower the gauge of a yarn the thicker the glove will be.  The higher the yarnÂ’s gauge the thinner the glove will be, which allows for ultimate dexterity.

Sold/Each

View AllClose

Additional Information

Sold:
Each
View AllClose

Related Products