FallTech 72906SC6 DuraTech 6' Arc Flash Mini SRD Single-leg Steel Carab+Alum Captive-eye Carabiner - 1 Each

With its small and light weight design, the DuraTech Arc Flash rated MINI SRD offers a 6’ working length. It is available in single or twin-leg configurations with a variety of steel or aluminum leg connectors.

The DuraTech Arc Flash rated Mini SRD is extremely durable and effective fall protection after an Arc Flash or Blast up to 40 cal/cm2 making it ideal for use where high voltage electricity is a concern.

The DuraTech Arc Flash rated MINI SRD can also be used in welding applications.

Features:

• Single or Twin-Leg options with a variety of leg-end connectors. 100% tie-off with the twin configuration only.connectors. 100% tie-off with the twin configuration only.
• For use up to 5’ below the back D-ring.
• Rated for up to a 310 lbs. worker.
• Stainless steel pawls for fast stopping action.
• Compact and impact resistant Nylon housing.
• Fast-acting internal locking mechanism with FallTech’s exclusive WrapPack inline energy absorber limits fall arrest forces to 900 lbs. or less.
• Swivel eye and Carabiner with Alignment Clip available on the Twin-Leg option

Specifications:

Webbing: ¾” Kevlar® webbing; 4,500 lbs. Min Static Strength
Energy Absorber: Polyester with a Kevlar®/Nomex® protective cover
Swivel Eye: Alloy steel, 5/8” diameter eye
Main Spring: Carbon Steel
SRD Housing: Nylon
Main Shaft: Alloy steel
Locking Pawls: Stainless steel
Connectors: Plated Alloy Steel or Aluminum Alloy; 5,000 lbs. Min Static Strength with 3,600 lbs. Min Gate Strength.

Relevant Standards:

OSHA: CFR1926.502, CFR1910.66
ANSI: ANSI Z359.14-2012

Warnings:

Read, understand and follow all labels and  instructions prior to use.
Inspect before each use.
Remove from service if there is evidence of damage or excessive wear.
Remove from service if there is any signs of activation.
For use up to Max 2' below the user's dorsal D‐ring.

Sold/Each