Allegro 9404-04 AC Dewatering and Sludge Pump - CLOSEOUT

SKU:
AL-9404-04
UPC:
806808001559
MPN:
9404-04
Availability:
Ship 3-5 business days
Weight:
32.00 LBS
Width:
12.00 (in)
Height:
6.00 (in)
Depth:
6.00 (in)

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 4 or above and get 5% off
$859.78
Frequently bought together:

Description

Excellent for pumping standing water containing sand, solids, leaves or debris at a maximum of 50 gallons per minute. Submersible to 39 feet and continuous running water level to 3 1/2". 1/2hp motor.

Portable, submersible pumps are excellent for manholes, vaults, construction sites, residential, commercial, industrial wastewater and construction site drainage, and effluent transfer. They offer top discharging for which allow continuous operation at low water levels and extended dry runs without overheating.

Features:

Impeller: Semi-vortex Urethane rubber impeller with agitator suspends solids and allows for pumping of sand and stringy material
Seal: Double inside mechanical seals with silicon carbide faces, (top and bottom)
Shaft: 403 stainless steel sleeve, the most durable seal design available
Motor: Continuous air filled, copper wound motor with class B insulation
Protection: Built in thermal & amperage sensing, protector prevents failure due to overloading or accidental run-dry conditions
Bearings: Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life of 60,000 hours
Discharge: Top, flow-through design, with solids handling capability 1" x 3/8" (2.5cm x .95cm)
Connection: Fire hose style quick connect fittings (Cam-Lock design)
Elastomers: NBR (Nitril Buna Rubber)

Specifications:

Motor: 1/2 HP (.4 k W) 3600 RPM
60 Hz 115V AC Single Ø
Power Cable: Submersible 16' (4.87m) (76' Max)
Performance Range: 15~50 GPM (0.056~.19 m3/min)
Head: 6~34 Ft. (1.82~10.3m)
Max Water Temp: 104° F (40° C)

Construction:

Casing: Ductile cast iron
Impeller: Urethane rubber
Shaft: 403 stainless steel
Motor Frame: Aluminum alloy
Fasteners: 304 stainless steel

Specifications:

Discharge Bore
Inch
Motor Output
HP
Phase Total Head* (Max.)
Ft.
Capacity (Max.)
Gal/Min
Rated Current
Amps
Starting
Method
Weight Length of Cable
Ft.
Dimensions
Diameter Height C.W.L.* Inch
2 1/2 Single 39 50 5.1 Capacitor 25 16 9 1/2 13 3/8 3 1/2

 *C.W.L. - Continuous Running Water Level

Dimensions:

Discharge
Outlet
Height Total
Diameter
Weight
To Discharge Outlet To Top of Pump Total Screen
2"
5.0 cm
9.78"
25.0 cm
8.16"
20.7 cm
12.9"
32.8 cm
3.6"
9.0 cm
7.28"
18.5 cm
25 lbs
11.3 kg

Sold/Each

View AllClose

Additional Information

Sold:
Each
View AllClose