Ergodyne Squids 3182 Tool Tethering Kit

The Squids 3182 Tool Tethering Kit allows you to tether up to three 10lbs / 4.5kg tools, making it easy to use your tools on the job while preventing dropped objects when working at-heights.

Features:

• TESTED & APPROVED – Approved to the ANSI/ISEA 121-2018 standard
• MAX TETHERING CAPACITY – Tether up to three 10lb / 4.5kg tools
• SWIVEL DESIGN – Plated swiveling connection and adjustable barrel lock for tool attachment
• EASY APPLICATION – Self-Adhering Tape requires no heat
• CARABINER – Anodized aluminum alloy captive eye manual locking screwgate carabiner
• LOOP FOR TETHERING – Treaded loop end that grips the tool when attached
• KIT INCLUDES:
• Squids 3100F(x) Tool Lanyard Single Carabiner - 10lbs / 4.5kg
• Squids 3713 Elastic Loop Tool Tails Swivel - 10lbs / 4.5kg (3-Pack)
• Squids 3755 Self-Adhering Tape Trap - 12ft / 3.7m Roll

Details:

• Construction Swiveling Design
• Kit Type Hand Tool Tethering, Multiple Tools
• Max Weight Rating 10 Lbs / 4.5 Kg
• Product Type Tethering Kit
• Risk/Injury Falling Objects
• Standards/Compliance Ansi/Isea 121

WHAT’S INCLUDED

Includes a Squids 3100F(x) Single Carabiner Tool Lanyard, a 12ft / 3.7m roll of Squids 3755 Self-Adhering Tape Trap, and three Squids 3713 Swiveling Elastic Tool Tails.

RECOMMENDED TOOLS

It has always been a challenge to connect tool lanyards to different hand tools. The kit contains product solutions for tethering tools weighing less than 10lbs / 4.5kg including: claw hammers, sledgehammers, mallets, pliers, bolt cutters, spud wrenches and bull pins.

STRAIGHTFORWARD INSTALLATION

Connection points for tool lanyards are not always readily available on tools, which can create a hazardous environment while working at heights. Learn how to tether your tools using the products included in the kit here. Simply measure and cut the tape to the specified length listed in the full instructions. Lay the tool tail on the tool being tethered and wrap the tape once around itself beginning directly below the barrel lock. Continue wrapping and stretching the tape firmly, overlapping previous laps by 0.5in - 0.75in / 13mm - 19mm. Continue wrapping until you reach the end. Firmly push down on the end and attach the Squids 3100F(x) Tool Lanyard to complete the tethering system. See full instructions for more details.

Sold/Kit