Tractel
Tractel T1T50G BLOCFOR 50 ft. Galvanized Wire Rope
- SKU:
- FS-T1T50G
- UPC:
- 80687393985
- MPN:
- FS-T1T50G
- Availability:
- Ship 1-2 weeks
- Weight:
- 21.00 LBS
- Width:
- 12.00 (in)
- Height:
- 6.00 (in)
- Depth:
- 6.00 (in)
- Shipping:
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Buy 2 - 3 | and get 3% off |
Buy 4 or above | and get 5% off |
Description
The Blocfor® self-retracting lifeline provides freedom of movement to workers performing their job at various heights. The device automatically takes up the slack in the wire rope, keeping it out of the way while minimizing the free fall distance, should a fall occur. In the event of a fall, the sudden jerk in the wire rope will activate the centrifugal locking mechanism, arresting the fall within 2 ft. (0.6 m)
Very lightweight and easy to handle, the Blocfor® features two carrying handles that facilitate the transportation and installation of the device. The device can be converted from a retracting unit to a recovery device in a few seconds simply by pressing a button. The bi-directional feature of the unit allows the injured worker to be lowered or raised. This feature also makes it possible to slightly lower a worker to free him from obstructions before raising him.
Features:
- Housing
–Synthetic case works with the frame to dissipate and absorb shock
if dropped or struck by objects (T1T50).
- Construction
– Isolated drum keeps all brake components contaminate-free.
– All parts are corrosion resistant.
– Mechanical parts are not dependent on the integrity of the housing.
- Brake mechanism
– Twin stainless steel disc brakes with copper/alloy coil in the centre (all parts are anti-spark).
– Twin inertia and speed-activated brake pawls are designed to activate and engage at the same time. This design compensates against gravitational effects when the block is used horizontally.
As a result, the braking system of the Blocfor® offers faster reaction.
- Design
– Features a carabiner-positioning washer.
– Rubber stop which is easy to take in hand and acts as a buffer when cable is accidentally released (high-speed recoil).
-Reinforced plastic rope guide is designed for high wear resistance, low cost and easy maintenance.
-Swivel self-locking snap hook has a visual fall indicator to allow inspection before each use.
- No annual factory re-certification except in Canada.
- Canadian Standards Association (CSA) Z259.2.3-04 requires inspection, maintenance and recertification annually, regardless of usage.
Specifications:
- Construction: ABS
- Wire Rope Length: 50 ft. (15 m)
- Wire Rope Construction: 3/16 in. (4.7 mm) dia. 7 X 19 stainless steel (S) preformed wire rope with ordinary lay right SZ and IWRC core
- Wire Rope breaking strength: 3,597 lbs. (16 kN)
- Wire Rope Tension: 50 N
- Unit Weight: 18 Ibs. (8.2 kg)
- Avearge Recovery Speed (in (mm/turn): 3 1/8 in. (80 mm)
- Maximum Arresting force: 900 lbs. (4 kN)
- Maximum fall arrest distance: 24 in. (600 mm)
- Force to apply on handle to lift 200 lbs. (100 kg): 17.5 lbs. (8 kg)
- Capacity: 310 lbs. (140 kg), one person
Applications:
- Storage tanks
- Tunnels
- Silos
- Ship compartments
- Vats
- Vaults
- Boilers
- Pipelines
- Sewers
- Ladders
Applicable standards:
- ANSI Z359.1-1999
- OSHA 1926
- CSA Z259.2.3-04, type 3